Général

• Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
• Grâce à la technologie des onduleurs, l'efficacité énergétique est plus élevée que celle des machines conventionnelles.
• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.
• 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires.
• Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder.
• Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet.
• Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder.
• Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow sensor settings are adjusted from the digital panel of the wire feeding system.
• ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.
• 24V AC outlet for CO2 gas heater.
• Built in gas cylinder platform with large wheels to ease mobility in workshops.
• Protected against voltage fluctuations.
• Conçu également pour l'usage extérieur, l'indice de protection est IP 23.

Spécifications techniques